Learn About FCA Violations

Overview

In January 2017, EPA issued a notice of violation to Fiat Chrysler Automobiles N.V. and FCA US LLC (collectively FCA) for alleged violations of the Clean Air Act for installing and failing to disclose engine management software in certain light-duty diesel vehicles sold in the United States. In May 2017, the U.S. Department of Justice filed a complaint against FCA for these violation and others, including allegations that the software constitutes one or more defeat devices. The undisclosed software results in increased emissions of nitrogen oxides (NOx). On January 10, 2019, the United States and California announced a settlement agreement to resolve the alleged violations.

The Clean Air Act requires vehicle manufacturers to demonstrate to EPA through a certification process that their products meet applicable federal emission standards to control air pollution. As part of the certification process, automakers are required to disclose and explain any software, known as auxiliary emission control devices, that can alter how a vehicle emits air pollution. FCA did not disclose the existence of auxiliary emission control devices to EPA in its applications for certificates of conformity for model year 2014, 2015 and 2016 Jeep Grand Cherokees and Ram 1500’s, despite being aware that such a disclosure was mandatory. 

In addition, the Clean Air Act makes it a violation to manufacture, sell, offer to sell, or install defeat devices. A defeat device is a vehicle design feature that reduces the effectiveness of the emission control system under conditions which may reasonably be expected to be encountered in normal vehicle operation and use. 

By failing to disclose this software and then selling vehicles that contained it, FCA violated important provisions of the Clean Air Act.

Read the complaint against FCA.

Coordination with California

EPA worked in coordination with the California Air Resources Board (CARB), which also issued a notice of violation to FCA to reach a settlement with FCA. The agencies continue to coordinate on the implementation of the settlement terms.

Frequently Asked Questions

What vehicles are affected?

Ram 1500, 3.0 Liter Diesel Engine (Model Years 2014-2016)
Jeep Grand Cherokee, 3.0 Liter Diesel Engine (Model Years 2014-2016)

How many of the affected vehicles were sold in the U.S.?

The allegations cover roughly 101,000 vehicles sold in the United States.

What pollutants are being emitted?

Vehicles emit an array of pollutants. EPA standards control the allowable emission levels of nitrogen oxides (NOx), hydrocarbons, carbon monoxide, carbon dioxide, particulate matter, and certain toxic chemicals. The FCA software affects the way the NOx control system operates, resulting in higher NOx emission levels from these vehicles than from vehicles with properly operating emission controls.

How does NOx pollution affect people’s health?

NOx pollution contributes to atmospheric levels of nitrogen dioxide, ground-level ozone, and fine particulate matter. Exposure to these pollutants has been linked with a range of serious health effects, including increased asthma attacks and other respiratory illnesses that can be serious enough to send people to the hospital. Exposure to ozone and particulate matter have also been associated with premature death due to respiratory-related or cardiovascular-related effects. Children, the elderly, and people with pre-existing respiratory disease are particularly at risk for health effects of these pollutants.

FCA Clean Air Act Settlement FAQs

What are the key elements of this settlement agreement?

Our settlement addresses the violations by requiring FCA to: (1) bring the vehicles into compliance with the applicable emission standards under the Clean Air Act; (2) perform a mitigation project that reduces excess NOx emissions from other vehicles in order to offset the excess emissions caused by the defeat devices; (3) take measures to prevent future violations; and (4) pay a substantial civil penalty to ensure the company does not keep its profit from the defeat devices and to deter future violations.

• Civil Environmental Penalty: $305 million
• Federal Mitigation: improvement of 200,000 aftermarket catalysts
• Vehicle Repair: CAA compliant repair of at least 85% of affected vehicles
• Corporate Compliance: enforceable measures to prevent future violations

Who is agreeing to the consent decree?

The U.S. Department of Justice, the Environmental Protection Agency, the California Air Resources Board and the California Attorney General on behalf of the State of California, and various FCA entities. (FCA US LLC, Fiat Chrysler Automobiles NV, V.M. Motori S.p.A., and V.M. North America, Inc.).

This settlement does not involve consumers, other federal agencies, or states other than California.

How did EPA find this software? When?

EPA discovered these defeat devices at the National Vehicle and Fuel Emissions Laboratory (NVFEL). This testing was performed after the EPA’s announcement on September 25, 2015, following the Volkswagen diesel emissions scandal, that it would perform additional testing “using driving cycles and conditions that may reasonably be expected to be encountered in normal operation and use, for the purposes of investigating a potential defeat device.” The EPA initially identified at least eight AECDs in the affected vehicles that were not described in the applications for the certificates of conformity that purportedly cover these motor vehicles. The United States alleged in its complaint that one or more of these AECDs is a defeat device.

Which vehicles are covered by this settlement?

The affected vehicles are the 101,482 model year 2014-2016 diesel Ram 1500s and Jeep Grand Cherokees. 100,148 were registered in the United States as of October 2018; those are distributed as follows:

Model Year	Ram 1500	Jeep Grand Cherokee
MY 2014	14,222	14,053
MY 2015	31,923	8,251
MY 2016	29,186	2,513

What does this mean for vehicle owners?

If a vehicle owner’s vehicle is affected, FCA will send the individual a letter notifying them about the recall and repair program. At that time, the vehicle owner can schedule an appointment to have their vehicle repaired. The repair consists only of a software update, also called a “software reflash” or an “Approved Emissions Modification.” No hardware changes are necessary. Once FCA repairs the vehicle, FCA will provide the vehicle owner with an extended warranty for the emission control system.

FCA’s websitecan also provide additional information. If you have questions, you also can call 1-833-280-4748, e-mail [email protected], or write via regular mail to EcoDiesel Settlement Claims, PO Box 2960, Farmington Hills, MI 48333-2960.

I got the fix, and I’m now having trouble with my vehicle.  What should I do?

A small number of consumers have complained about a lag in acceleration under cold start conditions.  In response, FCA has developed and the United States and California have approved an update to the software fix.  You should receive a notification from FCA regarding the process for obtaining this update.

If you are experiencing other problems with the fix, your attempts to receive the fix, claims under the extended warranty, or delays in receiving your payment, please contact FCA or the class action plaintiffs’ attorneys from the law firm of Lieff Cabraser.

To contact FCA, you can call 1-833-280-4748, e-mail [email protected], or write via regular mail to EcoDiesel Settlement Claims, PO Box 2960, Farmington Hills, MI 48333-2960.

I already got the software fix. Why did I get another notice from FCA?

Based on a small number of consumer complaints, FCA has proposed and the United States and California have approved an update to the software. This update is intended to address acceleration lag issues in cold start conditions.

How does EPA know that the emissions modification will work?

FCA has performed extensive emissions testing to demonstrate that the emissions modification works and maintains emission controls that will meet applicable emission standards under real-world driving conditions. EPA observed this on-site testing at FCA and conducted confirmatory testing of vehicles with the emissions modification. This testing included standard regulatory emissions tests (“on-cycle” testing), as well as special tests (“off-cycle” testing) conducted in an EPA laboratory, and on-road testing using a Portable Emissions Measurement System (also called a PEMS test). CARB also tested vehicles that have been modified with the Approved Emissions Modification, including real-world testing with PEMs, to assess their emission performance.

Furthermore, the consent decree requires FCA to demonstrate that vehicles that receive the emissions modification will remain in compliance with applicable emission standards for the vehicles’ full useful life.  A number of the vehicles will be tested each year for five years following entry of the consent decree to ensure that the repair is successful and that the vehicles continue to comply with emission standards.  FCA may incur additional penalties if the vehicles fail this in-use compliance testing.

Is there an end date or a completion date in the settlement?

FCA is required to update at least 85 percent of the vehicles within 2 years of the effective date of the settlement.  The Approved Emissions Modification will remain available to consumers indefinitely.

Why isn’t there a buyback option, like the VW 2.0L settlement?

In the VW 2.0 Liter settlement, VW was not able to demonstrate that it could repair the vehicles so that they would meet applicable emission standards. For that reason, VW was required to offer a buyback option for those vehicles. In this case, as in the VW 3.0L settlement, the affected vehicles can be modified to meet the emission standards to which they were originally certified and are not required to be bought back.  EPA’s priority has been to address the pollution problem and get the polluting vehicles off the road or bring them into compliance with emission standards. With this settlement, we are doing just that.

This settlement requires FCA to recall and repair these vehicles so that they comply with their certified exhaust emission standards. The approved emissions modification has undergone extensive testing and will fix these vehicles so that they comply with their certified exhaust emission standards.

What is a defeat device?

Generally, a defeat device is any part or component that defeats any element of design of a vehicle or engine installed to comply with the Clean Air Act. Specifically in the context of certifying motor vehicles, a defeat device is a vehicle design feature “that reduces the effectiveness of the emission control system under conditions which may reasonably be expected to be encountered in normal vehicle operation and use…” EPA may allow such features to be included in a vehicle, but only if: (1) Such conditions are substantially included in the Federal emission test procedure; (2) The need for the feature is justified in terms of protecting the vehicle against damage or accident; (3) The feature does not go beyond the requirements of engine starting; or (4) The AECD is justified for emergency vehicles. 40 C.F.R. § 86.1803-01.

Do other diesel vehicles have the same software or problems with compliance?  Is EPA investigating? Are you going to test them?

It is essential that EPA maintain an active compliance and oversight presence and constantly adjust our protocols in ways that manufacturers can’t anticipate. In September 2015, just after announcing the VW violations, EPA informed manufacturers that the Agency would expand its confirmatory testing process to screen for defeat devices. We have done just that, and it was this program that uncovered the defeat devices in the 3.0 liter VW vehicles and the FCA vehicles.

The vast majority of manufacturers both foreign and domestic have demonstrated through extensive Agency testing that their vehicles do comply with stringent emission standards in all types of normal vehicle operation. This reinforces our determination to continue to apply rigorous oversight, to change up our testing as circumstances and technologies change, and to hold manufacturers accountable if we do find issues.